BR 11e - pneumatic - ANSI
Butterfly valve
VALVE STYLE
Butterfly valve
USAGE
- Throttling service
- Low-pressure service
- On/off service
- Hygienic service
VERSION
ANSI
MEDIUM TEMPERATURE
-23
to 120 °C /
-9.4
to
248 °F
SUPPLY
Pneumatic
VALVE SIZE
NPS 2
to
NPS 48
PRESSURE RATING
Class 150
LINING
EPDM
Special features
- Consisting of double-flange butterfly valve and actuator
- DIN ISO 5211 interface as standard
- EPDM lining
- Lug-type and wafer-type bodies
- Disk design with optimized flow contour
- Leakage requirements according to DIN EN 12266
Accessories
- Lever
- Locking facility
- Air filters
Options
- Stainless steel butterfly disk
- Butterfly valve body made of spheroidal graphite iron
BR 11e - pneumatic - ANSI can be combinated with the following actuations:
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Power transmission without clearance thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 18 to 1702 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Additional pneumatic input at the top shaft end
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Backlash-free force transmission thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 / NAMUR and VDI/VDE 3847
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
- Integrated Automation acc. to VDI/VDE 3847
Information
Support
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin items on your list and contact us if you have any product-related questions.
Back to product selector