VALVES

PRODUCT SELECTOR

SMART IN FLOW CONTROL

BR 20a - pneumatic - ANSI

Ball valve

VALVE STYLE
Ball valve

USAGE

  • Low-pressure service
  • On/off service

VERSION
ANSI

MEDIUM TEMPERATURE
-10 to 200 °C / 14 to 392 °F

SUPPLY
Pneumatic

VALVE SIZE
NPS ½ to NPS 8

PRESSURE RATING
Class 150

LINING
PTFE

Special features

  • Consisting of PTFE-lined ball valve and actuator
  • Suitable for (highly) corrosive process media
  • DIN ISO 5211 interface as standard
  • Straight-through flow path
  • High Kv coefficients
  • 5 to 8 mm PTFE lining
  • Single-piece ball shaft
  • Blow-out-proof shaft
  • Replaceable PTFE seals
  • PTFE V-ring packing loaded by disk springs
  • TA Luft
  • Face-to-face dimensions according to DIN EN 558, Series 1 or 3
  • Leakage requirements according to DIN EN 12266 or API 598

Accessories

  • Lever
  • Locking facility
  • Air filters

Options

  • Stem extension
  • Stainless steel body
  • Calibrated seals
  • Linings of special compounds, such as conductive PTFE
  • Heating jacket
  • Double packing
  • Grooved flanges according to DIN EN 1092
  • FDA-compliant seals
  • Balls and seals made of different materials

BR 20a - pneumatic - ANSI can be combinated with the following actuations:

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 5 to 11674 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Power transmission without clearance thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 18 to 1702 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Additional pneumatic input at the top shaft end
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Backlash-free force transmission thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 / NAMUR and VDI/VDE 3847
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard
  • Integrated Automation acc. to VDI/VDE 3847

Information

  • AB FM 8.7-6

    Declaration of Contamination for Pfeiffer Vales and Components
    [EN][DE]
  • AB SAMLOOP

    SAMLOOP Antriebsausrichtung
    [DE]
  • T 20a

    BR 20a · PTFE-lined Ball valve
    DIN and ANSI version
    [EN][DE]

Support

  • SH 20

    BR 20a / BR 20b Ball Valve
    BR 21a Drain Ball Valve
    [EN][DE]

Certificates

Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.

Pin product

Pin items on your list and contact us if you have any product-related questions.

WATCHLIST

Wallet is empty
Back to product selector