KBR 500/550 - pneumatic - ANSI

Ball valve

VALVE STYLE
Ball valve

USAGE

VERSION
ANSI

MEDIUM TEMPERATURE
-10 to 180 °C / 14 to 356 °F

SUPPLY
Pneumatic

VALVE SIZE
NPS 1 to NPS 12

PRESSURE RATING
Class 150 to Class 300

LINING
without

Ball Valve to meet very high requirements concerning resistance to wear, corrosion and high temperatures
Shaft, shaft guide and seats have particularly stable construction
Bidirectional design
Mounting and seal of closure member in floating design up to DN 175

KBR 500/550 - pneumatic - ANSI can be combinated with the following actuations:

Special features:

Single-acting and double-acting piston actuator
Suitable for strict requirements in chemical plants
Opening angle 90°
Signal pressures up to 10 bar
Torques from 5 to 11674 Nm
Temperatures from –40 to +80 °C
End positions adjustable within wide range (+5°/–15°)
Diagonal or parallel square drive position
Position indicator adjustable in steps of 45°
Encapsulated spring assemblies
Power transmission without clearance thanks to involute gearing
Direction of rotation reversible without requiring additional parts
Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
Centering ring milled into the housing
Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
Simple attachment according to DIN EN ISO 5211
Blow-out-proof travel stop screws
Fast stroking speeds as standard

Special features:

Single-acting and double-acting piston actuator
Suitable for strict requirements in chemical plants
Opening angle 90°
Signal pressures up to 10 bar
Torques from 18 to 1702 Nm
Temperatures from –40 to +80 °C
End positions adjustable within wide range (+5°/–15°)
Additional pneumatic input at the top shaft end
Diagonal or parallel square drive position
Position indicator adjustable in steps of 45°
Encapsulated spring assemblies
Backlash-free force transmission thanks to involute gearing
Direction of rotation reversible without requiring additional parts
Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
Centering ring milled into the housing
Standardized attachment of valve accessories according to VDI/VDE 3845 / NAMUR and VDI/VDE 3847
Simple attachment according to DIN EN ISO 5211
Blow-out-proof travel stop screws
Fast stroking speeds as standard
Integrated Automation acc. to VDI/VDE 3847

Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.

Pin items on your list and contact us if you have any product-related questions.

VALVES